NITRO Touring Car          1/10th scale             

Engine capacity is to be maximum .12 (2.11cc) for bump box start or a .15 for a pull start configuration                                                                    

Standard pull-start is optional.   

16% NITRO Fuel ONLY

Fuel tank capacity to be 75.cc including all fuel tubing, filters, etc. No loose inserts allowed
inside the tank.

Tyres – foam Tyres are permitted, shore rating optional. WIDTH front 26mm rear 30mm.

Bodies must be a 1:10 scale in character reproduction of touring car (sedan) 2 and 4-door
vehicles that exists ore have existed, and raced in an international Touring Car series.

Click on the links below for a more specified outline.

https://rcra.org.au/public/docs/downloads/ic-onroad/aarcmcc-ic-1-10th-200mm-ps-touring-car-technical-rules-201301.pdf

https://rcra.org.au/public/docs/downloads/ic-onroad/aarcmcc_rcra_1_10th_ic_onroad_technical_rules_november_2020.pdf

                                     

EP Touring Car         1/10th

• ISTC 13.5t -Stock Class
• ISTC Modified

Sensored or sensorless (modified only) motors allowed

“540” Size specifications:

Classes to be driven by only 2S LiPo batteries with a maximum nominal voltage of 7.6v

Moulded rubber tyres only allowed.

Description (mm)                                         Min          Max
Wheelbase                                                    250          270
Width (without body)                                  170          190
Width (with body)                                         175           195
Length (inc body and wing)                       360          460
Wheel Diameter                                            46             50
Wheel width (including tyre bead)           18              26
Tyre Width –                                                                      27
Tyre Diameter                                                 52             67
Ground clearance (at race ride height)    5* –

Whilst charging and/or discharging, batteries should be contained in a LiPo sack or other device (fire
mitigation device able to withstand and contain a destructive failure without showing a flame)

Weight: All Touring Car minimum weight: 1320 grams ready to race including transponder, at all times
during the race:

Bodies are only allowed if on current IFMAR, EFRA, ROAR or BRCA bodyshell listings, and comply with
the Global Body Specifications (GBS) for electric touring cars.

 

Click on the links below for a more specified outline.

https://drive.google.com/file/d/13xYhYGL0Ub_E8exhhaYIqshRA0fkd3lg/view

 

                              

MINI Touring Car – Cairns Club Specific Class 

Any 1/10 M-Chassis spec cars only – Rear wheel, Front Wheel or 4wd Allowed

Example – Tamiya Mini MO3 / M05, BSR M RAGE M-Chassis, Express m – chassis.

Any 17.5T OR 2500kv +/- 100KV Brushless motors.

Speed Controllers as per ROAR BRCA list – Class is run under stock class regulations i.e Blinky mode.

Any 4 or 2 Door Touring Car OR GT Style Body of any era.

Any commercially available rubber mini-sized tyre, in any combination and/or compound, with any insert.

Cars must be assembled as per instruction manual and no chassis/powertrain modifications allowed

Hop-up Parts – ESC, bearings and Manufacture hop-up parts only permitted.

 

 

FORMULA 1 for 

Any commercially available 1:10 scale rear wheel drive F1 or Indy Car chassis

Rubber  F1 tyres – Open compound allowed

Any F1 body shell

Any 2S hard case lipo

Any 21.5 OR 17.5  turn brushless motor

No electronic driving aids

https://www.rcformula1.com.au/index.php/australian-news/rules